Rosher Consulting

Software Consulting and Development Services

House Network Part 1

I’ve had a number of posts planned for a while on the new home network, as it’s been nearly 2 years since we moved house, it’s about time I got around to blogging about it!

Our old house had a home network but it was organic in nature, it started off with a wireless router and was then augmented with a mixture of cat5e and cat6 cables from the router to various rooms as needed. I also had a couple of small Netgear swtiches to help extend it even further, so basically it wasn’t very efficient but it got the job done.

I’d seen a few home network installs on various forums over the years (in particular this), so when we decided to move house, I started to plan what I wanted and as soon as we were settled in the new house I ordered everything I would need to get started with the install.

Toys!48 port patch panel and patch leads

Yes, that is 610m of Cat6 cable! :-)

The loft in the new house is quite big, so it seemed the perfect location for node zero, the only problem was how to run the cables from the loft to the rest of the house? After some debate with the other half we decided that running the cable through our bedroom and in to the garage below was the best option as that also enabled me to run the cables from the garage in to the cupboard under the stairs and then from there under the floorboards, eventually I would box in the cables running through our bedroom (2yrs later and this still isn’t done, whoops).

Lots of cable!Eeek!That's a bit better

Once I’d got to this point, I asked a friend to help me route them downstairs and under the floorboards to the various points in the lounge, it took us a whole day but me managed to get it all done and we’d just put the last floorboard back when the other half came home, phew!

In total the initial run included 11 cables, with 8 points going behind the TV, 2 at the far end of the room and 1 in the hallway by the telephone point.

Through the garageUnder the stairs and floorboardOut they pop

Finishing offFar end of the roomHallway

Initially I wasn’t planning on getting a server rack as I thought they were too expensive, however I found a seller on eBay that were selling them for a great price. In total I bought a 12U rack and 2 x 3U shelves for £103 and I have to say that the quality of the rack is excellent and the packaging was first class, can’t recommend highly enough.

The rack arrivesThe rack installed

End of Part 1 – in Part 2 we’ll expand the system with even more cable runs and I’ll explain what the various points are being used for.